February 19, 20242 yr Hey I am trying to start with unraid but k can’t get it to boot. The system immediately goes into hibernation after I select the usb as a boot device then booting it again ends up with no display output at all. Motherboard Fujitsu D3643-H and 9600k with 8GB Ram and newest Bios installed. secure boot is disabled. Media Boot for removeable media is enabled too. it happens on 2 complete different USB sticks. Tried to use the usb creation tool and did it manual. Used windows and mac for creating it. always ended up in the same way. I can boot on grub on truenas but would rly prefer to go unraid. IMG_4142.mov Edited February 19, 20242 yr by AR4KA
February 19, 20242 yr Author Motherboard has no fast boot option only quite boot. tried all different type of ports. its uefi only
February 19, 20242 yr Author Did some more testing can’t boot into any os. the system immediately goes into hibernation and never goes back to the bios after it goes into hibernation could be some error too as the led flashes 3 times fast a very short break and 3 times again . The power led stays on and that’s it.
February 19, 20242 yr Community Expert Why do you say it hibernates? When there is no OS loaded, how is this different from shutting down or crashing?
February 19, 20242 yr Author The power led starts to blink 2 times fast then a pause then again. I think some hardware defect is my issue as I bought all used parts for a low power server. did replace everything now apart from mainboard and cpu so either of these are dead
February 19, 20242 yr Community Expert Can you even get to the BIOS now? 23 minutes ago, AR4KA said: blink 2 times fast then a pause then again Probably means something do you have the motherboard manual? Maybe try without one RAM stick? CPU cooling OK?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.