Christian Demoulin Posted February 23 Share Posted February 23 I would like if possible to ask for help to restore my UNRAID server, I had to move following the loss of my partner and I have all our personal data (and photos) in my unRaid NAS, unfortunately the USB key has was lost while it was on the NAS and I do not have a screenshot of the order of my 8 hard drives (I have the license activation key) I read the guide and searched on Reddit, honestly I'm too afraid of doing something wrong and losing everything. If someone could help me, even remotely connected or otherwise. I also agree to pay for support. Thank you for any information that could help me restore the data. https://docs.unraid.net/es/unraid-os/manual/changing-the-flash-device/ Quote Link to comment
itimpi Posted February 23 Share Posted February 23 You might find this section of the online documentation accessible via the Manual link at the bottom of the Unraid GUI useful? Feel free to ask for clarification if needed. Quote Link to comment
Christian Demoulin Posted February 24 Author Share Posted February 24 19 hours ago, itimpi said: You might find this section of the online documentation accessible via the Manual link at the bottom of the Unraid GUI useful? Feel free to ask for clarification if needed. Thank you for the help link, so if I understand correctly, as long as I know THE disk (18TB) which serves as parity I can put the other disks in another order without losing the data ? Quote Link to comment
Solution itimpi Posted February 24 Solution Share Posted February 24 1 hour ago, Christian Demoulin said: Thank you for the help link, so if I understand correctly, as long as I know THE disk (18TB) which serves as parity I can put the other disks in another order without losing the data ? Yes. You might then need to do editing of share properties if you had non-default settings for any if them. Quote Link to comment
Christian Demoulin Posted February 27 Author Share Posted February 27 Hello, i am actually here, and the message : All existing data on this device will be OVERWRITTEN when array is Started DO i have to be afraid ? because i have error with some disks too at the boot 27-02-2024 14:23 Unraid Disk 7 SMART health [199] Warning [MINITOWER] - udma crc error count is 1 TOSHIBA_HDWG480_32E0A0SHFA3H (sdh) warning 27-02-2024 14:23 Unraid Parity disk SMART health [199] Warning [MINITOWER] - udma crc error count is 104 TOSHIBA_HDWG51J_9350A01JFQ3H (sdi) warning 27-02-2024 14:22 Unraid Disk 6 SMART health [199] Warning [MINITOWER] - udma crc error count is 1 TOSHIBA_HDWG480_32E0A0SHFA3H (sdh) warning 27-02-2024 14:22 Unraid Parity disk SMART health [199] Warning [MINITOWER] - udma crc error count is 101 TOSHIBA_HDWG51J_9350A01JFQ3H (sdi) warning 27-02-2024 14:14 Unraid device dev9 SMART health [199] Warning [MINITOWER] - udma crc error count is 100 TOSHIBA_HDWG51J_9350A01JFQ3H (dev9) warning 27-02-2024 14:14 Unraid device dev1 SMART health [199] Warning [MINITOWER] - udma crc error count is 1 TOSHIBA_HDWG480_32E0A0SHFA3H (dev1) warning I post the photo before touch anything (do i have to say the parity is already valid ?) Quote Link to comment
Veah Posted February 27 Share Posted February 27 (edited) I believe you can proceed. Here is how I understand that image. With the parity sorted out and the array disks assigned even in a different order, what will be overwritten is the parity drive only. The data on Disks 1-7 will remain intact. I understand your angst so in your shoes, I would wait for one of the pros to swing by and give a final look at it. edited cause it read funny. Edited February 27 by Veah Quote Link to comment
itimpi Posted February 27 Share Posted February 27 You might want to play safe and initially start the array without assigning a parity drive. That way you definitely cannot have an accident. 1 Quote Link to comment
Christian Demoulin Posted February 28 Author Share Posted February 28 Thank you Veah for your explanation, I understand better how the parity disk works. Thank you intimpi I started booting without the parity disk, I have access to all my data. Just a problem installing the key, I have an ERROR 8. So next step restart the server and install the parity disk right ? Quote Link to comment
itimpi Posted February 28 Share Posted February 28 46 minutes ago, Christian Demoulin said: So next step restart the server and install the parity disk right ? Yes - assuming you want to keep using the Unraid server and have some protection against drive failure. 47 minutes ago, Christian Demoulin said: Just a problem installing the key, I have an ERROR 8 Do you have the .key file? If so it should be just a case of putting it into the ‘config’ folder on the flash drive. Quote Link to comment
Christian Demoulin Posted February 28 Author Share Posted February 28 3 hours ago, itimpi said: Do you have the .key file? If so it should be just a case of putting it into the ‘config’ folder on the flash drive. I have the link for download it in my mailbox (https://keys.lime-technology.com/unraid/XXXXXXXXXXXXXXXXX/Plus.key i hide the real number), but i have another error : {"error":"Key Not Found"} Quote Link to comment
trurl Posted February 28 Share Posted February 28 5 minutes ago, Christian Demoulin said: {"error":"Key Not Found"} Is this error from trying to download the key using the link? Quote Link to comment
JorgeB Posted February 28 Share Posted February 28 43 minutes ago, Christian Demoulin said: but i have another error : {"error":"Key Not Found"} Contact support with the GUID and they can send a new link. Quote Link to comment
Christian Demoulin Posted February 28 Author Share Posted February 28 yes Trurl, i got this error trying download the key using the link. thank you, i just send a message from the link in JorgeB Quote Link to comment
Christian Demoulin Posted February 28 Author Share Posted February 28 Hello, and thank you for make my server back with the license. Now just another problem, for all my docker containers i cant edit any configuration, and i have this message when i try update : Quote Updating the container Configuration not found. Was this container created using this plugin? Quote Link to comment
trurl Posted February 29 Share Posted February 29 Your docker templates are on flash in config/plugins/dockerMan/templates-user, and these are required to work with the containers from the webUI. If you don't have a backup you will have to do them over. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.