vw-kombi Posted February 27 Share Posted February 27 No matter how many times I click to cancel parity check, it will not. It is not really running as disks are spun down as normal. System is all operational. I would like to kill the check from command line or something ? Any ideas ? Diags attached. tower-diagnostics-20240227-1044.zip Quote Link to comment
YrDaDy Posted February 27 Share Posted February 27 in console or SSH can try "mover stop" Quote Link to comment
vw-kombi Posted February 27 Author Share Posted February 27 2 hours ago, YrDaDy said: in console or SSH can try "mover stop" Its not mover - its the parity check. Quote Link to comment
JorgeB Posted February 27 Share Posted February 27 Unraid driver crashed, this is almost always a hardware issue, type reboot in the CLI, if it doesn't reboot after 5 minutes you will need to force it, the RAM is currently overclocked for your config, see here, correct that and try again, if the same run memtest. Quote Link to comment
vw-kombi Posted February 28 Author Share Posted February 28 Whats this mean - 'he RAM is currently overclocked for your config' My system has not changed in many years - 2019 it was built. No strange changes. I can see how that memory issue wold be an issue now. Unless it s faulty - so memtest I guess. Quote Link to comment
JorgeB Posted February 29 Share Posted February 29 10 hours ago, vw-kombi said: Whats this mean - 'he RAM is currently overclocked for your config' See the link above. Quote Link to comment
vw-kombi Posted March 1 Author Share Posted March 1 No worries. Had to push the button in the end. Cancelled the auto parity check. Submitted a new one with corrections. Will monitor. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.