chaz4070 Posted November 13, 2011 Share Posted November 13, 2011 Hi everyone, I've found different answers as well as different fixes while looking around the forums/wiki. My dilemma is this: I just added another disk (disk5) to my array as the others were very close to full. I have three shares: TVShows, Data, and Movies. Both TVShows and Data were added as folders on the new drive but I cannot figure out why Movies is not adding. I currently have movies on the cache drive and when I execute the mover script the log shows an error with device full message. I have tried manually adding every disk in the included list and taking them out. I have tried all methods of allocation. I have tried it with 2 as the split level, 7, 99 and just leaving it blank. My current min size free is set to 50GB and the new disk is the only one with enough space to cover that. I have tried setting it up just like TVShows that is working but that didn't work either. Edit: oops forgot to say running 5.0beta12a if that helps. I have seen it here in a few places that adding the Movies folder manually to disk5 may fix this? Any other suggestions? And if this is the fix, would someone be kind enough to post the commands? Disk5 became sda in my array. I can telnet in with no issue but I am not familiar enough navigating with linux/slackware to create a new folder on the correct disk. Edit 2: Figured out to create the directory and it did not fix my issue. Just ran the mover script again and got the same error "Nov 12 20:05:36 Tower shfs/user0: shfs_write: write: (28) No space left on device" so now I'm really stuck. As always, thanks for any help/insight anyone can provide, Chaz Quote Link to comment
dgaschk Posted November 13, 2011 Share Posted November 13, 2011 http://lime-technology.com/forum/index.php?topic=9880.0 Quote Link to comment
chaz4070 Posted November 13, 2011 Author Share Posted November 13, 2011 http://lime-technology.com/forum/index.php?topic=9880.0 Sorry about that - I should have added all that first time around... Syslog attached. System specs: Core i3 540 with 8GB of ram. unRaid Plus 5.0-beta12a. 5 data disks in the array plus one parity and one cache drive, pic included of Shares and drives. Thanks again for any assistance, Chaz chazsyslog.txt.zip Quote Link to comment
dgaschk Posted November 14, 2011 Share Posted November 14, 2011 The parity disk, disk0, is having many problems. Check the cabling and get a SMART report. Quote Link to comment
chaz4070 Posted November 14, 2011 Author Share Posted November 14, 2011 I appreciate the heads up - some of the things in the report scared me such as lots of "old age" and "pre-fail." I have another disk that I will replace it with. I attached the report below. Would these errors be causing my original posted issue of the Movies share not expanding to the new data drive? I'm still having a hard time figuring it out as the TVShows and Data shares both added the drive without issue. Thanks again for any help, Chaz Smart report is as follows: Statistics for /dev/sdc 00W2B0_WD-WMAY00266356 smartctl -a -d ata /dev/sdc smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Black family Device Model: WDC WD2001FASS-00W2B0 Serial Number: WD-WMAY00266356 Firmware Version: 01.00101 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Nov 13 23:25:15 2011 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 118) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (29760) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 188 187 051 Pre-fail Always - 54610 3 Spin_Up_Time 0x0027 155 154 021 Pre-fail Always - 14208 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 554 5 Reallocated_Sector_Ct 0x0033 192 192 140 Pre-fail Always - 62 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 8150 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 46 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 21 193 Load_Cycle_Count 0x0032 190 190 000 Old_age Always - 31951 194 Temperature_Celsius 0x0022 109 091 000 Old_age Always - 43 196 Reallocated_Event_Count 0x0032 139 139 000 Old_age Always - 61 197 Current_Pending_Sector 0x0032 199 197 000 Old_age Always - 361 198 Offline_Uncorrectable 0x0030 200 195 000 Old_age Offline - 123 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 197 155 000 Old_age Offline - 625 SMART Error Log Version: 1 ATA Error Count: 21717 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 21717 occurred at disk power-on lifetime: 8136 hours (339 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 28 70 4b 00 e0 Error: UNC 40 sectors at LBA = 0x00004b70 = 19312 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 4f 4b 00 e0 08 3d+11:21:49.315 READ DMA ef 10 02 00 00 00 a0 08 3d+11:21:49.315 SET FEATURES [Reserved for Serial ATA] ec 00 00 00 00 00 a0 08 3d+11:21:49.311 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 3d+11:21:49.311 SET FEATURES [set transfer mode] Error 21716 occurred at disk power-on lifetime: 8136 hours (339 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 28 70 4b 00 e0 Error: UNC 40 sectors at LBA = 0x00004b70 = 19312 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 4f 4b 00 e0 08 3d+11:21:47.500 READ DMA ef 10 02 00 00 00 a0 08 3d+11:21:47.500 SET FEATURES [Reserved for Serial ATA] ec 00 00 00 00 00 a0 08 3d+11:21:47.496 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 3d+11:21:47.496 SET FEATURES [set transfer mode] Error 21715 occurred at disk power-on lifetime: 8136 hours (339 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 28 70 4b 00 e0 Error: UNC 40 sectors at LBA = 0x00004b70 = 19312 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 4f 4b 00 e0 08 3d+11:21:45.686 READ DMA ef 10 02 00 00 00 a0 08 3d+11:21:45.686 SET FEATURES [Reserved for Serial ATA] ec 00 00 00 00 00 a0 08 3d+11:21:45.682 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 3d+11:21:45.682 SET FEATURES [set transfer mode] Error 21714 occurred at disk power-on lifetime: 8136 hours (339 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 28 70 4b 00 e0 Error: UNC 40 sectors at LBA = 0x00004b70 = 19312 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 4f 4b 00 e0 08 3d+11:21:43.871 READ DMA ef 10 02 00 00 00 a0 08 3d+11:21:43.871 SET FEATURES [Reserved for Serial ATA] ec 00 00 00 00 00 a0 08 3d+11:21:43.867 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 3d+11:21:43.867 SET FEATURES [set transfer mode] Error 21713 occurred at disk power-on lifetime: 8136 hours (339 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 28 70 4b 00 e0 Error: UNC 40 sectors at LBA = 0x00004b70 = 19312 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 4f 4b 00 e0 08 3d+11:21:42.056 READ DMA ef 10 02 00 00 00 a0 08 3d+11:21:42.056 SET FEATURES [Reserved for Serial ATA] ec 00 00 00 00 00 a0 08 3d+11:21:42.052 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 3d+11:21:42.052 SET FEATURES [set transfer mode] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 60% 8150 7 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Quote Link to comment
lionelhutz Posted November 14, 2011 Share Posted November 14, 2011 It looks to be dying to me. You have many sectors pending reallocation which is very bad. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.