March 28, 20242 yr Did the upgrade to .9 and after the reboot the Cache drive was missing. Did the downgrade back to .8 and the drive is still missing. I've attached the Diags from after the upgrade to .9 and then the downgrade to .8 when it was still not working. Server is a R720xd, seems all the SAS drives are still being detected that were in the array. I have two SSD sata drives that were for Cache and cloud. The cloud is still being detected. taz-diagnostics-20240328-1710-6-12-8.zip taz-diagnostics-20240328_1645-6.12.9.zip Edited March 28, 20242 yr by Pkspawn fix attachment
March 28, 20242 yr Community Expert If it's still missing after downgrading, the upgrade wasn't the problem, do you know to which controller the device is connected to?
March 28, 20242 yr Author I'm not sure what is going on. Everything appeared to be working fine with the exception the Array was getting low on space. Ran the update, then stopped all the dockers, shutdown the array and rebooted. And saw the error about the Cache drive missing. says no device and below it shows the old drive/serial which i guess it's looking for. I downgraded and its showing the same thing. I shutdown the server entirely. swapped the locations of the two SSD drives, and still the 1TB cache drive is no longer being seen.. Not sure on the controller? I believe its a LSI SAS2308.
March 28, 20242 yr Community Expert Try swapping cables between the two devices and see where the problem follows.
March 29, 20242 yr Author Very weird that the system was running fine until the upgrade. But in odd coincidence I guess the drive decided to die on the reboot. I pulled it and installed into another system and is not being detected there and the system is throwing up errors. Other SSD is fine in both systems. Thank you for your assistance.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.