Keep getting this error every day and ive deleted the docker img file and rebuilt it already.  Checked out the SSD that the cache is on and i keep getting write errors on the primary SSD Cache Drive.  I pulled it and reseat it as well.  I have it in Raid 1 so if i have to swap it out thats fine even more so as i have spares available.  Just wanna make sure im not missing something but Im wondering if i have a bad drive.

Thanks

Diags.zip

Constant errors with sdr and sdr cache devices, check/replace cables, or try connecting then to a different controller and post new diags.

just swapped the drive to a different slot.  can't really do another controller as its all an 8 device backplane on a dell 1u server.  I'll let you know if the problem continues.  im running a scrub and a balance just to get the drive going. 

Also check the log to see if the errors are still spamming it.

So far so good.  Just finished the scrub and balance and no errors and nothing in the log other then the balance and scrub.  Guess I'll let it run for the day and then if its good figure out why that slot is giving me trouble as its a brand new server.  Figures its something basic.  Much appreciated and I'll mark as solution for now.

Thanks 

2 hours ago, JorgeB said:

Constant errors with sdr and sdr cache devices, check/replace cables, or try connecting then to a different controller and post new diags.

And the errors are back.   New diags are posted.  

waz-server-diagnostics-20240416-1158.zip

Unlikely that it's a device problem, try bypassing the backplane.

I don't think i can do that...its a dell r360 1u server.  My question then would be why only the cache drives?  the other 4 ssd drives are on the same backplane.

It could be the devices, but IMHO unlikely that two would have issues at the same time.