Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

停电关机后u盘异常

Featured Replies

求助断电后ups关机

重启发现有时候不读U盘有时候报错以下代码

然后重启和拔插usb几次进入过系统,重启又在出现以上情况循环!

 

Buffer 1/O error on dev sda1, logical block 4642782, asunc page read device offline error, dev sda, sector 4644831 op 0x0: (READ) flags Ox phys_seg prio class 2

Buffer 1/0 error on dev sda1, logical block 4642783, async page read mount: /boot: /dev/sda1 is not a valid block device.

amesg (1) may have more information after failed mount system call.

cannot mount /dev/sda1 - press ENTER key to reboot ... sd 0:0:0:0: [sda] Synchron izing SCSI cache

sa 9:0:0:0: Isial Synchronize Cache (10) failed: Result : hostbyte=0x01 driverbyte

=DRIVER

7-6

Device not responding to setup address.

2-6

Device not responding to setup address.

2-6:

分示步步公。

device not accepting address 3,

error

-71

2-6

Device not responding to setup address.

2-6: Device not responding to setup address.

2-6: device not accepting address 4, error -71

Device not responding to setup address.

Device not decepting addrestus, addross.

device not accepting address error

2-6: Device not responding to setup address.

usb

2-6: Device not responding to setup address.

usb 2-6: device not accepting address

6, error

-71

usb usb2-port6:

unable to enumerate USB device

 

 

 

 

Solved by JackieWu

  • Author

: 0:0:0: Isda] Synchronize Cache (10) failed: J

1-?: new high-speed USB device number 8 using

1-7: device descriptor read/64, error

-71

, 1-7: device descriptor read/64, error

-71

• 1-?: new high-speed USB device number 9 using

b

1-7: deuice descriptor read-64 ,

error

-71

sb 1-7:

deuice descriptor readr64.

error

-71

sb usb1-port?:

attempt power cycle

usb

1-2 :

new high-speed USB

USB device number 10 using

usb

1

2

Device not responding to setup address.

Deuice not responding to setup address.

usb

device not accepting address 10, error

-71

usb usb

1

new high-speed USB device number 11 using h

usb

Device not responding to setup address.

usb

-?:

Device not responding to setup address.

-71

device not accepting address

11, error

usb

1-2:

usb usb1-port7:

unable to enumerate USB device

  • Solution
40 minutes ago, AllenProX said:

Buffer 1/O error on dev sda1, logical block 4642782, asunc page read device offline error, dev sda, sector 4644831 op 0x0: (READ) flags Ox phys_seg prio class 2

 

重装一下 Unraid 系统试试,参考:如何安装/重装/更换unRAID系统

 

断电导致 U 盘出现问题的情况之前也有过案例,所以如果出现类似的情况建议尝试重装一下系统。

  • Author
13 minutes ago, JackieWu said:

 

重装一下 Unraid 系统试试,参考:如何安装/重装/更换unRAID系统

 

断电导致 U 盘出现问题的情况之前也有过案例,所以如果出现类似的情况建议尝试重装一下系统。

嗯我已经转移U盘

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.