Jump to content

[SOLVED] Preclear output - should I worry about Multi_Zone_Error_Rate?


vj

Recommended Posts

I bought a new Samsung 1TB drive and ran preclear with -A and -c 3 options. The final output is as below. I have attached all the preclear output files and the syslog (in case you need them)

 

Disk Temperature: 35C, Elapsed Time:  28:35:47
========================================================================1.13
==  SAMSUNG HD103SJ    S246J9KB913571
== Disk /dev/sde has been successfully precleared
== with a starting sector of 64
============================================================================
** Changed attributes in files: /tmp/smart_start_sde  /tmp/smart_finish_sde
               ATTRIBUTE   NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS      RAW_VALUE
     Raw_Read_Error_Rate =   100     252           51        ok          0
          Power_On_Hours =   100     252            0        ok          29
  Hardware_ECC_Recovered =   100     252            0        ok          0
   Multi_Zone_Error_Rate =   100     252            0        ok          1
No SMART attributes are FAILING_NOW

 

Thanks!

 

VJ

syslog-2011-12-06.txt

preclear.zip

Link to comment

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...