April 30, 20242 yr Hi, I have a Netapp DS4246 with 24x 4tb drives. It was working great for about a month with a Netapp PM8003 card until I updated and it caused havoc and I now can't access my ZFS raidz1 pool. Bit of a concern as it has a lot of data on it. Doing a zpool import showed most of the drives as unavailable at the time except for a couple. I'm aware of the compatibility issues between unraid and the PM8003, so I took the opportunity to get an LSI 9300 card instead. Firing it up tonight, the file system is still unmountable and it wants me to format. Here is the log for the zpool import now: zpool import -f pool: netapp id: 17755539231543376304 state: UNAVAIL status: One or more devices contains corrupted data. action: The pool cannot be imported due to damaged devices or data. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-5E config: netapp UNAVAIL insufficient replicas raidz1-0 UNAVAIL insufficient replicas sdaa1 UNAVAIL sdab1 ONLINE sdac1 ONLINE sdad1 ONLINE sdae1 ONLINE sdh1 ONLINE sdag1 ONLINE sdah1 ONLINE sdai1 ONLINE sdaj1 ONLINE sdak1 ONLINE sdal1 ONLINE sdam1 ONLINE sdan1 ONLINE sdao1 ONLINE sdap1 ONLINE sdv1 ONLINE sdw1 ONLINE sdas1 ONLINE sdat1 ONLINE sdau1 ONLINE sdav1 ONLINE replacing-22 DEGRADED 10124387424495728984 UNAVAIL sdab1 ONLINE sdz1 UNAVAIL ^^I notice that the lettering scheme has changed. They all use to be sda, sdb, sdc. But now theres a mix of sdaa1, sdab1 etc. I also note that when the drives are sitting in unassigned devices, some are mountable, some aren't. See attached screenshot. Should I try a new config? Please, any guidance would be greatly appreciated.
April 30, 20242 yr Community Expert Looks like there was only one vdev? Please post the output again from zpool import but using code tags, e.g.: NAME STATE READ WRITE CKSUM seaone ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 sdab1 ONLINE 0 0 0 sdac1 ONLINE 0 0 0 sdad1 ONLINE 0 0 0 sdae1 ONLINE 0 0 0 sdaf1 ONLINE 0 0 0 sdag1 ONLINE 0 0 0 sdah1 ONLINE 0 0 0 sdai1 ONLINE 0 0 0
April 30, 20242 yr Author hey Jorge, apologies, I am a complete zfs newbie. I tried googling what you asked for but I can't find the command.
April 30, 20242 yr Community Expert I wanted to see the output of just 'zpool import', without anything else added.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.