Hello everyone I just started my trail on unraid, the day after (today) I started like normal and it all worked fine untill it foze, and then I disconected from the web gui. I tried to scan the network for the ip with the server on, I had no sucsess so I attatched a monitor to it to see what was going on (I had set up an static ip). I booted up the server with the monitor connected to it and I saw when it had booted up that there was no ipv4 and ipv6 address set. Is this the issue? Does anyone know how to help me?

fat-phoque-diagnostics-20240504-1453.zip syslog

Edited May 4, 20242 yr by Wout_van_der_Aa

Please post the diagnostics.

1 hour ago, JorgeB said:

Please post the diagnostics.

hey, The diagnostics should now be in the post. Thanks for letting me know

According to the diagnostics the system thinks that the LAN connection is not active.   You might want to check that it is securely plugged in.   It could also be worth power-cycling the equipment just in case something needs resetting.

1 hour ago, itimpi said:

According to the diagnostics the system thinks that the LAN connection is not active.   You might want to check that it is securely plugged in.   It could also be worth power-cycling the equipment just in case something needs resetting.

Hey, I saw that the cable wasn't fully in the ethernet port. I plugged it in but now I get a 169.254. . ip address on my network its 192.168. . Do you know whats wrong and how I can fix it?

I would suggest rebooting and then posting new diagnostics if you still do not have a valid IP address.

3 hours ago, itimpi said:

I would suggest rebooting and then posting new diagnostics if you still do not have a valid IP address.

hey, I fixed it by resetting my switch and changing the ethernet cable, Thank you for all the help!