May 9, 20242 yr Hi all, I am running unraid on my PR4100 from wetsern digital and trying to control the fan PWM and LCD display. But this is not possible at the moment, because unraid lacks I2C and UART support for the Braswell controller. I found a script for FreeNAS to control all these peripherals, but i do not have the following devices: /dev/cuau3 /dev/ada I also can't run this command either: sysctl -n dev.cpu.0.temperature Do i need to upgrade the unraid kernel? Is it possible to control the I2C and UART via docker without upgrading the unraid kernel? This is the script than i found for FreeNAS: Hardware control script for PR2100/PR4100 (github.com) Thanks for helping me Pauell
May 11, 20242 yr Author Solution I have created a script based on wdhws v1.0 from TFL. This script can control the LCD, buttons, power LED and fan speed. CreLab: Unraid hardware control for WD PR4100 (github.com) The next step would be to install the script via unraid app install. Who can help me with this? Edited May 11, 20242 yr by pauell
May 7, 20251 yr Thank you for this. I can't seem to figure out how to change the static power button LED color or stop it from blinking red, but it fixed the fans and let me set the LCD screen. On a side note, can it auto-scroll the info on the panel?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.