Can Unraid support multiple IP addresses on different VLANs

[Bmalone]

I have 2 Supermicro storage servers which have 2 x 10GbE ports and 2 x 1GbE ports.  I only have on 10G port per server on my switch so there is no bind. Eth0 has the 10G connection.  I would like to use eth1 to put on the VLAN where my backup Unraid server is so they can communicate over that VLAN.  I would then like to create a bond by connecting both of the remaining ports to another switch I have, which supports LAGG, and have that on another VLAN, and create a separate bridge so any containers using that bridge can communicate with a Proxmox server I have on a different VLAN.  Is this possible?  

 

I've tried creating new bond for eth 2 and eth3 and adding the VLAN I want them on but when I rebooted eth0 changes IP addresses and VLANs, even though I didn't make any changes to eth0 and everything went tits up.  I had to delete the network.cfg file and start again.  The documentation is really light, practically non-existen for more complex network setups so I thought I'd ask here.

[Bmalone]

Anyone?

[OrneryTaurus]

I tried doing this and had a situation where eth0 couldn't communicate to the internet so I reverted and said screw it for now.

[Bmalone]

Saw a lot of posts where people are having issues.  It seems Unraid is okay for the simplest of network configs, but anything more advanced either isn't supported or is non-functional.