Coque Posted May 30 Posted May 30 Hello everyone. I have upgraded my server and added a new SAS hard disk controller. When I restart the server, the pool I had previously running and connected to the SATA ports on the motherboard. I have assigned the disks through the GUI, but it marks them as WRONG. How could I remount the Zpool without losing the data? Thanks. PS: I haven't exported the zpool Quote
JorgeB Posted May 30 Posted May 30 That suggests you are using a RAID controller, or needs a firmware update, please post the diagnostics. Quote
Coque Posted May 30 Author Posted May 30 The controller is an HP P822 and I do not have it configured in RAID mode. It is configured in HBA mode. Each disk is detected individually. That's what I find strange. midiam.local-diagnostics-20240530-1501.zip Quote
JorgeB Posted May 30 Posted May 30 That's still a RAID controller, not a true HBA, and it's changing the devices name, we don't recommend using those, but if the only thing that is being changed is the names, it should if you re-import the pool, post the output of zpool import Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.