nico44 Posted June 4 Posted June 4 (edited) I replaced the drive and rebuild it 2 times, restarted the system 3 times and still have the errors. diagnostics-20240604-0933.zip Edited June 4 by nico44 Quote
JorgeB Posted June 4 Posted June 4 Jun 4 09:10:57 C-132 kernel: ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jun 4 09:10:57 C-132 kernel: ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100) Jun 4 09:10:57 C-132 kernel: ata5.00: revalidation failed (errno=-5) Jun 4 09:10:57 C-132 kernel: ata5.00: disable device Disk dropped offline, this is usually a power/connection issue, but since it dropped there's no SMART, replace cables and post new diags after array start. Quote
nico44 Posted June 4 Author Posted June 4 I checked the power cable all is good. I did change the sata cable. diagnostics-20240604-1514.zip Quote
JorgeB Posted June 5 Posted June 5 SMART looks good, a few CRC errors, so likely the issue was caused by a bad SATA cable. emulated disk is mounting, thought it's empty, I assume it already was? Quote
nico44 Posted June 6 Author Posted June 6 How come I still see the error ? Everything looks good now. diagnostics-20240606-1128.zip Quote
itimpi Posted June 6 Posted June 6 13 minutes ago, nico44 said: How come I still see the error ? Everything looks good now. diagnostics-20240606-1128.zip 117.09 kB · 0 downloads Have you tried clicking on the orange icon and then selecting the Acknowledge option? You then only get notified if the value changes. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.