June 5, 20242 yr HI All! I recently decided to upgrade from a USB based NAS to a HBA NAS (if you can call it that) My build is as follows: PC = Lenovo M90s - i7 10th gen HBA = LSI 9206-16e Card Cables = SFF8644 to 4x SATA HDDs = 1x 1tb + 1x 4tb (only using for testing for now) When looks in the MAIN tab on UNraid, I cannot see either of those drives in the drop downs. I can feel that the HDDs are working as they are spinning up. I was wondering what I did wrong for them not to show. Any help would be appreciated!
June 5, 20242 yr Author SO I got my card from ebay (Ad: https://www.ebay.com/itm/394354192990) as you can see it says, IT mode, which leads me to ASSUME that it has been flashed already. Is there anyway to confirm this?
June 5, 20242 yr 43 minutes ago, Tuntira said: Is there anyway to confirm this? diagnostics should show which driver is being loaded.
June 14, 20242 yr Author databunker972-diagnostics-20240614-2158.zip Above is the diagnostic file, any thoughts?
June 14, 20242 yr LSI is in IT mode, and the controller is getting correctly detected and initialized, if the disks are spinning up, the most likely culprit will be the cables, using reverse instead of forward breakout, next suspect would be the controller itself, it can be bad, but this is much less likely.
June 14, 20242 yr Author Thanks for the feedback, can you elaborate on reverse instead of forward breakout?
June 15, 20242 yr Author Thanks for the link! I noticed that in one of the replies on the post @JorgeB mentioned that the max length from controller to SATA devices is 1m, I purchased 2m cables (https://www.ebay.com/itm/404899847766?var=674932978994) It looks like that could be the problem. As a matter of interest, why would they sell 2m cables if only 1m cable work? Edited June 15, 20242 yr by Tuntira
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.