June 21, 20242 yr Hi everyone, I recently updated the BIOS on my ASUS ROG MAXIMUS Z790 HERO motherboard to version 2301. Since the update, my Unraid server hangs during the boot process and does not proceed further. The server was functioning perfectly for more than a year before this BIOS update. I've tried the following troubleshooting steps to fix this: Checked BIOS Settings. Reset BIOS to Default Settings. Re-flashed BIOS. Checked Boot Device Order. Created a New Unraid Boot USB. However, after trying all of those steps still couldn't get unraid boot and it still hangs as the attached picture shows. Has anyone encountered a similar issue with the ASUS ROG MAXIMUS Z790 HERO and BIOS version 2301? Are there any specific BIOS settings or configurations known to resolve this issue? Any other suggestions or troubleshooting steps I might have missed? Thank you in advance for your help!
June 22, 20242 yr Community Expert Try booting with a different flash drive using a stock install, no key needed, to confirm the issue is really the board, not the current flash.
June 22, 20242 yr Author 14 hours ago, JorgeB said: Try booting with a different flash drive using a stock install, no key needed, to confirm the issue is really the board, not the current flash. Thanks @JorgeB for the advise. I tried what you've mentioned but that didn't work also. I ended up to the same issue again.
June 24, 20242 yr Author On 6/23/2024 at 2:57 AM, JorgeB said: That suggests the board (or a BIOS setting) is the problem. Any thought how to fix it?
June 24, 20242 yr Community Expert Any chance you have multiple video outputs on the system? I have weird flopping back and forth between my integrated video and my external GPU... Also I have (After updating my BIOS) s freeze if I try to use GUI mode... which may be connected.
July 6, 20242 yr Author On 6/24/2024 at 9:11 PM, JorgeB said: See if you can downgrade the BIOS, or use a different board. did this part and didn't work... I'm hopeless 😔
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.