July 6, 20241 yr Hi guys, I just install StarTech 8P6G-PCIE-SATA-CARD 8 Port SATA PCIe Card to my unraid in pcie slot 2. However it auto passthrough to vm when vt-d enable, But if I vt-d disable all my drive came back. I have to make my vt-d enable because I need to use my GPU on pcie slot 1 with my vm. In case, is there any way I can leave vt-d enable, and disable my pcie slot 2 (the sata card) to passthrough? OR is there any way I can disable vt-d, let my pcie slot 2 sata card stay with my unraid, and only passthrough my pcie slot 1 GPU to my vm?
July 6, 20241 yr When you add hardware the IDs can change. You are probably finding that the nes card is taking over the ID of the GPU. I woul recommend disabling the GPU pass through before adding the card and redoing it afterwards.
July 6, 20241 yr Author 32 minutes ago, itimpi said: When you add hardware the IDs can change. You are probably finding that the nes card is taking over the ID of the GPU. I woul recommend disabling the GPU pass through before adding the card and redoing it afterwards. I tried, but still not working if I use vt-d then the pcie card passthrough automatically, If I disable vt-d then all my hard drive linked to this pcie sata card are missing.
July 7, 20241 yr 19 hours ago, K.A said: 8P6G-PCIE-SATA-CARD This is a known issue with this controller, and even with VT-d disabled some users report dropped devices issue, recommend using a different one:
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.