July 9, 20241 yr Thanks in advance for anyone who has a minute to check my diagnostics (attached). I think my next step is shut down and swap SATA cable, right? Or do I just swap cable while powered up? tower-diagnostics-20240709-0014.zip
July 9, 20241 yr Community Expert Disk dropped offline, check/replace cables and post new diags after array start.
July 9, 20241 yr Community Expert 5 hours ago, FamilyMan said: ? Or do I just swap cable while powered up? Unraid is not ‘hotplug aware’ so any time you want to do things like checking/changing the cabling and/or power you need to power it off.
July 10, 20241 yr Author Thank you for helping. I swapped cables around on all disks, shut down and restarted. Disk still has red x and disabled. Ran SMART short self-test (passed), and got new diagnostic report (attached). Running SMART extended test, now sitting at 10% after nearly 1 hour. What's next do you think? tower-diagnostics-20240709-2256.zip
July 10, 20241 yr Community Expert Solution SMART look OK, most likely it dropped due to a power/connection issue, emulated disk is mounting, assuming contents look correct you can rebuild on top: https://docs.unraid.net/unraid-os/manual/storage-management#rebuilding-a-drive-onto-itself
July 10, 20241 yr Community Expert 4 hours ago, FamilyMan said: Disk still has red x and disabled. This status is not cleared until you rebuild.
July 10, 20241 yr Community Expert 4 hours ago, FamilyMan said: Running SMART extended test, now sitting at 10% after nearly 1 hour. Worth pointing out that this takes something like 1.5 to 2 hours per TB and only increments in 10% intervals.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.