July 12, 20241 yr I got the above nic recently and its not coming up with either 10g fiber or 10g ethernet modules. Getting lots: [bnx2x_open:12488(eth3)]Recovery flow hasn't been properly completed yet. Try again later. If you still see this message after a few retries then power cycle is required. and others like this: [bnx2x_fw_dump_lvl:794(eth2)]\x013MCP PC at 0xffffffff [ 1862.322189] bnx2x: [bnx2x_fw_dump_lvl:815(eth2)]Trace buffer signature is missing. connection from this card is to a Ubiquiti 10g Aggregation Switch. Motherboard is an ASROCK X570D4U with 5950x and 64G ram I see others have had simular issues with this or other Broadcom 10g cards, but I didn't see any real solution. I would be greatful if someone could take a look at the diags and point me in the right direction even if that's back to ebay, lol. -j tower-diagnostics-20240712-0102.zip
July 12, 20241 yr Author I just knew I was going to get asked that I'll make a boot disk and test it, hold my beer.
July 12, 20241 yr Author It does NOT seem to work in 6.12.1. Diags are attached. I didn't create any shares or pools, as they are already configured for 7.0.0 and I didn't really want to wipe that. I can if needed, but the results from dmesg look identical. tower-diagnostics-20240712-1231.zip
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.