July 15, 20241 yr Hello, I started the parity sync process 3 times now and it keeps stopping randomly. I have a N100 chinese board (SZBOX) with 32gb ddr5 ram. All settings in BIOS are default. Parity drive is a 18TB Seagate Exos. And I have 3 16TB Exos Drives in the Pool. Cache is a Intel Enterprise SSD 1.6 TB. I tried different things with settings in the bios. Mostly about C States, ASPM and all around enery efficiency. But this try was with default settings. All failed so far. I attach the syslog. I hope anybody can help, I am out of Ideas now. syslog-unraid-parity-crash.txt Edited July 15, 20241 yr by Nightdevil
July 15, 20241 yr Unraid driver is crashing, this is almost always a hardware problem, start by running memtest
July 15, 20241 yr Author I did already a memtest a full day with zero errors. But I did it again today with 1 run. Seems like the RAM is ok.
July 15, 20241 yr Solution memtest is only definitive if it finds errors, but since there's a small change it's a kernel compatibility issue, I would recommend retrying with 7.0.0-beta2, if it's the same, it's almost certainly a hardware problem.
July 15, 20241 yr Author in the meantime here is the syslog after rebooting and starting the sync with 7.0.0-beta2 starone-syslog-20240715-1633.zip
July 16, 20241 yr Author array sync did work without any errors with version 7.0.0-beta2. Thank you for the help. Looks like everything works without problems now
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.