Hello all,

TLDR my plex was down so I went to check it on the server and couldnt stop or start it, rebooted the server and docker service wouldnt start. Only error I see is a drive with an issue the sandisk that isnt being used for anything right now. So I deleted the vdisk and reinstalled previous apps, went well except swag didnt work. Thats fixed now after a few hours of bashing my head. Anybody smart see anything as to why this might have occured? I did just replace a lsi card from a 8i to a 16i to make room for a 3090. Also a full hardware swap a few months back but ive had zero issues till yesterday.

 

Thanks for any tips, I need to get a monitor so I can memtest but other than that Im at a blank for what could be my issue or if it was just bad luck.

vsop-diagnostics-20240715-0804.zip

You could try installing the (new) Live Memory Tester plugin and see what that says as it can be run via the browser while Unraid is running its normal workload.
 

We do not yet have much feedback at how successful it is at finding RAM errors compared to using memtest and whether if found they are the same ones memtest would find.   However it would not hurt to try it and if it finds a problem you know that you have a RAM issue.   Please report back on the results if you try this.

So I ran 63 passes on 20gb of ram and had a bunch of failures. Some loops all passed, some had nearly all failures. I dont know where the log files are located in order to post. Im gonna run the real memtest here soon and see what I get. System was previously fully stable so this is odd but I will investigate. Maybe the ram settings are also too aggressive in bios for the additional heat the system now receives with the change in case.

I will update.

Log isn't really useful, even a single error means the system isn't stable/usable as is. 

Recommended to not even enable XMP on servers.