July 17, 20241 yr Hi All, whenever i update Unraid the reboot seems to hang for more than 20 minutes. I always have to do a hard shutdown and then reboot. However when unraid loads, it boots, i can mount the array fine, and the version number says its updated. This occurred on 6.12.10 -> 6.12.11 just now. I've uploaded my diagnostics, not sure why this is happening? Any help would be appreciated. unraid-array-diagnostics-20240717-1208.zip
July 17, 20241 yr Community Expert And if you do a reboot without updating does it do a clean reboot?
July 17, 20241 yr Author 5 minutes ago, JorgeB said: And if you do a reboot without updating does it do a clean reboot? Thank you for posting. No I havent tried doing that given the issue. I'll have to try in a bit.
July 17, 20241 yr Community Expert If it does the same, and I expect it will, it should save diags from the time of the shutdown to the flash drive /logs folder, post those.
July 17, 20241 yr Author 15 minutes ago, JorgeB said: If it does the same, and I expect it will, it should save diags from the time of the shutdown to the flash drive /logs folder, post those. Do the diagnostics i posted show something about it?
July 17, 20241 yr Author 4 hours ago, JorgeB said: Nope, the ones in the flash drive might. Those were from the flash drive, or rather the diagnostics had saved there. Are there other diagnostics i should be looking for?
July 18, 20241 yr Community Expert 15 hours ago, JorgeB said: it should save diags from the time of the shutdown to the flash drive /logs folder
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.