July 22, 20241 yr Hi, After upgrade to version 6.12.11 my unraid crashes all the time. Running time is random but usually after few minutes crashes and I need to hard shutdown. I do not have clue how to fix it. I even do not know where to start and how to troubleshoot. Can someone help please?
July 23, 20241 yr Mine is not even able to start anymore, hopefully I don't have to rebuild everything from scratch -.-
July 23, 20241 yr Author Hi. I have attached the file. I noticed when Docker Containers are disabled system is not crashing. I was turning dockers on one by one and when I started Deluge, after few minutes system crashed. Maybe that has any connection with USB network card (Bus 004 Device 002 Port 4-1 ID 0bda:8156 Realtek Semiconductor Corp. USB 10/100/1G/2.5G LAN). I did upgrade from 6.12.6. I have plugin RTL8156(B) RTL8157 USB Drivers installed. zion-diagnostics-20240723-2322.zip
July 24, 20241 yr Community Expert Jul 23 06:50:16 Zion kernel: NETDEV WATCHDOG: eth1 (r8152): transmit queue 0 timed out .. Jul 23 06:50:16 Zion kernel: r8152 4-1:1.0 eth1: Tx timeout Jul 23 06:50:16 Zion kernel: r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd Jul 23 06:50:16 Zion kernel: r8152 4-1:1.0 eth1: Promiscuous mode enabled Looks like a NIC problem, try without the Realtek driver or with a different NIC.
July 25, 20241 yr Author Without the realtek driver I lost completely connection. NIC is not working without it. Switch to onboard NIC helped I am online again. Crashes are gone as well but I am back to 1Gbps NIC.
July 25, 20241 yr Community Expert USB NICs are known to be more unreliable, I would recommend getting a PCIe model, if possible.
July 26, 20241 yr Author Server is build on my old micro itx motherboard with only 1 pci slot which is taken by hdd controller. I can only use USB model to upgrade network speed.
July 26, 20241 yr Community Expert Post new diags without the Realtek driver and the USB NIC connected, I believe that NIC should work with the stock one.
August 27, 20241 yr Author Hi @JorgeB If I remember correctly I had USB NIC connected with drivers installed (it is working but is not stable and crashes system randomly). Then I removed driver. Reboot. No access to server. Turn off server. That should be in prevoius syslog. Then I changed USB port. Turn on server. No access. Disconnect network cable from USB Adapter and connect to internal NIC. That should be visible in current syslog. zion-diagnostics-20240827-1100.zip
August 27, 20241 yr Community Expert NIC is being detected as eth122, that usually means it does need the driver.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.