Sylwester Posted July 22 Share Posted July 22 Hi, After upgrade to version 6.12.11 my unraid crashes all the time. Running time is random but usually after few minutes crashes and I need to hard shutdown. I do not have clue how to fix it. I even do not know where to start and how to troubleshoot. Can someone help please? Quote Link to comment
JorgeB Posted July 23 Share Posted July 23 Enable the syslog server and post that after a crash. Quote Link to comment
SilverStone Posted July 23 Share Posted July 23 Mine is not even able to start anymore, hopefully I don't have to rebuild everything from scratch -.- Quote Link to comment
Sylwester Posted July 23 Author Share Posted July 23 Hi. I have attached the file. I noticed when Docker Containers are disabled system is not crashing. I was turning dockers on one by one and when I started Deluge, after few minutes system crashed. Maybe that has any connection with USB network card (Bus 004 Device 002 Port 4-1 ID 0bda:8156 Realtek Semiconductor Corp. USB 10/100/1G/2.5G LAN). I did upgrade from 6.12.6. I have plugin RTL8156(B) RTL8157 USB Drivers installed. zion-diagnostics-20240723-2322.zip Quote Link to comment
JorgeB Posted July 24 Share Posted July 24 Jul 23 06:50:16 Zion kernel: NETDEV WATCHDOG: eth1 (r8152): transmit queue 0 timed out .. Jul 23 06:50:16 Zion kernel: r8152 4-1:1.0 eth1: Tx timeout Jul 23 06:50:16 Zion kernel: r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd Jul 23 06:50:16 Zion kernel: r8152 4-1:1.0 eth1: Promiscuous mode enabled Looks like a NIC problem, try without the Realtek driver or with a different NIC. Quote Link to comment
Sylwester Posted July 24 Author Share Posted July 24 I will try first with onboard NIC Quote Link to comment
Sylwester Posted July 25 Author Share Posted July 25 Without the realtek driver I lost completely connection. NIC is not working without it. Switch to onboard NIC helped I am online again. Crashes are gone as well but I am back to 1Gbps NIC. Quote Link to comment
JorgeB Posted July 25 Share Posted July 25 USB NICs are known to be more unreliable, I would recommend getting a PCIe model, if possible. Quote Link to comment
Sylwester Posted July 26 Author Share Posted July 26 Server is build on my old micro itx motherboard with only 1 pci slot which is taken by hdd controller. I can only use USB model to upgrade network speed. Quote Link to comment
JorgeB Posted July 26 Share Posted July 26 Post new diags without the Realtek driver and the USB NIC connected, I believe that NIC should work with the stock one. Quote Link to comment
Sylwester Posted August 27 Author Share Posted August 27 Hi @JorgeB If I remember correctly I had USB NIC connected with drivers installed (it is working but is not stable and crashes system randomly). Then I removed driver. Reboot. No access to server. Turn off server. That should be in prevoius syslog. Then I changed USB port. Turn on server. No access. Disconnect network cable from USB Adapter and connect to internal NIC. That should be visible in current syslog. zion-diagnostics-20240827-1100.zip Quote Link to comment
JorgeB Posted August 27 Share Posted August 27 NIC is being detected as eth122, that usually means it does need the driver. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.