July 29, 20241 yr Hi, I need your help to point me if it was discussed and if there is a solution, or to help me with an advise of following issue. I already searched but I could not find the answer unfortunately. Most probably missed a post with the soluiton. I apologies for taking your time with this but if you have the answer please point me to it. I need to create, like in vmware, a switch port or bridge and pass all the VLAN traffic, to act like a trunk port. Attached there is a picture with what to be achieved. Basically the OPNsense will manage multiple VLAN's. The VLAN ports will be handled by one physically interface part of a bridge. In ESXI this was achieved by assigning the VM virtual interfaces to virtual switch and setting the switch to vlanID to 4095. Issue: Assigne the OPNsense virtual interfaces to Unraid bridge is not passing the Vlans. Once I have configured the VLAN in the OPNsense I lose the conectivity. I have the same configuration in ESXI and it is funcitonal. Question’s: 1) Is there Unraid design explained regarding networking, bridging, VLAN handling, trunk ports..etc? 1) How can I configure the bridge in trunk mode to pass tagged traffic? 2) How can I trace the bridge traffic and ports e.g tcpdump...etc. If I need to provide additional information please let me know. Thank you for your help,
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.