July 29, 20241 yr Hi everyone, I’m facing an issue with my server after recently changing my WiFi. I attempted to reboot the server, but now it’s stuck on “starting services.” Here’s a breakdown of what I’ve done so far: 1. Changed my WiFi network. 2. Rebooted the server, which led to the “starting services” issue. 3. Tried installing a fresh OS on the USB drive with versions 6.12.10 and 6.12.9. 4. Encountered the same problem with both versions: the server gets stuck loading when I add my drive to the array and try to start it up. Has anyone experienced this before, or does anyone have any suggestions on how to resolve this issue? Thanks in advance for your help!
July 29, 20241 yr Community Expert What do you mean by changed your WiFi? Unraid does not support WiFi, also please post the diagnostics, if you cannot get the diagnostics get the syslog at least cp /var/log/syslog /boot/syslog.txt
July 29, 20241 yr Author r2d2-diagnostics-20240729-1526.zip Attaching the diagnostic file if the syslog.txt is needed to I can get that as well. I just need to reboot since it leave my page froze when I start the array.
July 29, 20241 yr Community Expert Everything looks normal to me, can you access using the IP? http://192.168.1.14
July 29, 20241 yr Community Expert Sorry, I think I confused your thread with a different one, don't see any errors in the log, but it's not starting the services correctly, I would recommend recreating the flash drive with the latest release, and restore only from the current one the key and super.dat, though you just have one device assigned, so you can also just re-assign it.
July 29, 20241 yr Author No worries I did do a reinstall of the flash with 6.12.10 and 6.12.9 also recovering the key in both instances. But oddly it just wont' start I may try to remove the drive and put in a different one to see if it goes through. But not why the drive would be halting things.
July 29, 20241 yr Author If there is a way to clear the drive I will do that just to boot this thing back up
July 30, 20241 yr Community Expert 9 hours ago, eastcoastninja said: o worries I did do a reinstall of the flash with 6.12.10 and 6.12.9 Just to confirm, this was a clean install? Without copying anything other than the key from the old config?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.