July 30, 20241 yr I was on vacation last week and the power must have went out so my server shut itself down. I started it back up when I got home but one of the drives was missing (drive 3), I then stopped the array and now drive 1, 2, 4, 6 and 7 are missing. Also, now it just says, "no device" for drive 3 and does not list the missing device. I restarted the server but it would not get passed the boot screen, I had to clear the CMOS to get it to boot so I probably have something configured wrong now but that does not explain my problem before I reset the BIOS. The drives that are connected to the SATA ports are visible in the BIOS, but not UNRAID. Any help on getting these drives back would be very much appreciated. Unconfirmed 210012.crdownload
July 30, 20241 yr Community Expert 2 hours ago, knowpistons said: the devices connected to SATA ports show in the BIOS but not in unraid That's contrary to what the diags show: Jul 30 00:59:29 Tower emhttpd: Device inventory: Jul 30 00:59:29 Tower emhttpd: Samsung_SSD_850_EVO_250GB_S3PZNF0JA88884F (sdd) 512 488397168 Jul 30 00:59:29 Tower emhttpd: TEAM_T2532TB_TPBF2212130080800017 (sde) 512 4000797360 Jul 30 00:59:29 Tower emhttpd: WDC_WD80EMAZ-00WJTA0_2SG3PUXJ (sdb) 512 15628053168 Jul 30 00:59:29 Tower emhttpd: Samsung_SSD_860_EVO_1TB_S59VNMFN818850K (sdf) 512 1953525168 Jul 30 00:59:29 Tower emhttpd: WDC_WD181KFGX-68AFPN0_2JK1T78G (sdc) 512 35156656128 All these devices are connected to the onboard SATA, you may be missing an ad-don controller.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.