Hello,

 

I'm using v5.0-beta14. My System is not able to Power Off.

I Stop the Array, then select the 'Yes I want' and then 'Power off'

 

The Screen changes to 'normal' Power Off Screen, but that's all.

 

Even after more then 10 Minutes, the System ist still on, I can Ping it and also reach the UnMenu Page.

The 'normal' UnRaid Interface is set to the Poer Off Page.

 

I also tryed the Powerdown User Script nothing.

 

If I Power the Systen hard off, it behaves after a Restart just as nothing had happend, or better as every thing would have been performed normaly.

 

Any Ideas?

 

Used Hardware:

 

Mainbaord: Asus P8Z68-V Pro / Gen3

CPU: Intel i3 2120T

Ram: Kingston HyperX DIMM 16 GB DDR3-1600 Quad-Kit

PSU: Corsair CMPSU-850HX

Controller_1: HighPoint RocketRaid 2720SGL

Controller_2: SuperMicro AOC-SASLP-MV8

Controller_3: SuperMicro AOC-SASLP-MV8

 

 

cu

Matthias

Attach a syslog collected after you try to shutdown. Does the WebGUI show any status info at the bottom after you hit shutdown?

I'd love to do so....

When I tryed the first time, the System went down as it should.

I just got the normal System is going to shut down screen, right after I klicked the shutdown Button.

 

So I wanted to try it again and this time the system got frozen at once.

 

No power down Page, no telnet, no nothing.....

 

...now I'm watching a Parity Check.....

See here for options to capture the syslog: http://lime-technology.com/forum/index.php?topic=9880.0

I had this issue also twice. webGUI was just showing 'powering of system...'.

 

Log in locally and force a shutdown with

 

"shutdown -h now"

 

Parity check did not occur for me.

PS: I have completly different hardware, but I used the physical power button w/o stopping the array first.