cypres0099 Posted January 28, 2012 Share Posted January 28, 2012 I am trying to use this board for my very first unraid build. http://reviews.cnet.com/motherboards/intel-server-board-se7210tp1/4507-3049_7-30828369.html?tag=mncol;subnav I've got it all booted up and it recognized the onboard SATA (though SATA cards are being a pain in the butt) and the 100mb LAN, but the Gigabit is not working. Is there any way to get it working or am I going to have to get an add on Gigabit card? System log attached below. root@mongo:~# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: g Current message level: 0x00000007 (7) Link detected: yes root@mongo:~# ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: Unknown! Duplex: Unknown! (255) Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: umbg Wake-on: g Current message level: 0x00000007 (7) Link detected: no syslog.txt Quote Link to comment
Joe L. Posted January 28, 2012 Share Posted January 28, 2012 either disable eth0 in the BIOS, or configure/enable eth1 in the config/go script. Joe L. Quote Link to comment
cypres0099 Posted January 28, 2012 Author Share Posted January 28, 2012 That worked perfectly! Thanks! I just disabled the 100mb in the mother board bios. I don't know why I didn't consider the fact that the 100mb jack might be taking preference over the 1000mb jack. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.