August 19, 20241 yr Hallo, nachdem ich immer wieder Probleme mit Platten hatte, nun aber zwei neu dazugekommen sind, habe ich heute das Array als neue Konfiguration angelegt. Alle Platten formatiert um keine Fehler zu verschleppen. Nun läuft die Sync extrem langsam, KB-Bereich. Ich bitte einmal über die Diagnose zu schauen. Eventuell passt an der Hardware etwas nicht. Würde da auch was verändern, bin mir aber nicht sicher was genau sinnvoll wäre. Der Server stellt über 2 SSD Cache als Netzwerkspeicher für eine Werkstatt zur Verfügung. Das Array dient als Backup für die 3 Rechner via UrBackUp. Danke unraid-diagnostics-20240819-1826.zip
August 19, 20241 yr 8 minutes ago, redjudge said: Ich bitte einmal über die Diagnose zu schauen. massig Fehler hiervon ug 19 18:00:09 UNRAID kernel: ata6.00: failed command: FLUSH CACHE EXT Aug 19 18:00:09 UNRAID kernel: ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 6 Aug 19 18:00:09 UNRAID kernel: res 40/00:28:80:1f:71/00:00:74:00:00/40 Emask 0x10 (ATA bus error) Aug 19 18:00:09 UNRAID kernel: ata6.00: status: { DRDY } Aug 19 18:00:09 UNRAID kernel: ata6: hard resetting link Aug 19 18:00:15 UNRAID kernel: ata6: link is slow to respond, please be patient (ready=0) Aug 19 18:00:17 UNRAID kernel: ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Aug 19 18:00:17 UNRAID kernel: ata6.00: configured for UDMA/33 Aug 19 18:00:17 UNRAID kernel: ata6.00: retrying FLUSH 0xea Emask 0x10 Aug 19 18:00:17 UNRAID kernel: ata6: EH complete Aug 19 18:00:23 UNRAID kernel: ata6: link is slow to respond, please be patient (ready=0) Aug 19 18:00:25 UNRAID kernel: ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Aug 19 18:00:25 UNRAID kernel: ata6.00: configured for UDMA/33 Aug 19 18:00:31 UNRAID kernel: ata6: link is slow to respond, please be patient (ready=0) Aug 19 18:00:33 UNRAID kernel: ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Aug 19 18:00:33 UNRAID kernel: ata6.00: configured for UDMA/33 ... .. . kenn ich eigentlich nur von zu aggressiven Stromsparmaßnahmen ... oder fehlerhaften SATA Karten.
September 2, 20241 yr Author Ich habe nicht nur die Sata Kabel getauscht, sondern auch ein neues Board mit neuem RAM verbaut. Die Probleme bleiben die gleichen, ich habe das Netzteil im Verdacht, dass die 4 HDD und die 2 SSD doch zuviel sind. der E5-2630L v2 braucht auch was. Eventuell kommen da auch SMART-Fehler her…
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.