January 29, 201214 yr When i transfer stuff internally and externally to my server i keep losing data transfer(by this i mean that it says it can no longer access my network). It doesnt appear that my server is cutting out completely because i can still access the webgui..sys log attached hopefully shows something..using 5.0 beta 6 syslog.zip
January 30, 201214 yr I will watch this thread with interest. I have been having a similar persistent problem, but with 4.7. It occurs mainly with large files - a transfer will get anywhere from 30-80% through and then it will fail with the error message "specified network name is no longer available". The unRaid server is in fact working and there is no noticeable problem with it other than the file transfer problem. I thought it might have been at the desktop end of things but I have done some testing this morning and it happens with a number of different PCs at the other end. I have tried it via a switch (Dell 5224) or via only my router (Netgear WNDR3700). Either way it happens fairly consistently. I have sometimes suspected it happens primarily with one user share but I haven't really been able to confirm this with any certainty. I have searched this forum but I haven't really found anything helpful. Are your symptoms similar to this?
January 30, 201214 yr Author Are your symptoms similar to this? id have to say yes fairly similar. This problem has been intermittent with me for some time now. And never have i ever really got a definitive answer and the problems seems to go away but then reappears later on. It appears to me that this problem usually occurs when transferring data from within my server from one share to another. However this most recent time i have tried from external source and is still getting the problems..Do you have a monitor hooked up to your server? usually when these problems occur i get something like this but of course i do not know what any of it means lol like you i usually get up to 30-80% transfer completion before this happens.
January 30, 201214 yr Hmm, my unraid box doesn't have a screen. It sounds like I may have a different problem to you in that if I just move files internally on the unraid drives, everything seems to work (as far as I can tell, not being all that linuxy I just use Midnight Commander via SSH and everything seems to work properly.) My issue seems to be confined to file transfers over the LAN, usually large ones (4+ GB). It's always the same error message on the windows side: "specified network name is no longer available".
January 30, 201214 yr The log shows problems with sdd and sdb. Do they share a power splitter or SATA card?
January 30, 201214 yr Author the only one thats not on a power sata directly from the psu is sde...one thing i do notice about sdb and sdd is those are both unaligned while the others are 4K-aligned...but they do have the jumpers on them thats probably why they are unaligned...?
January 31, 201214 yr Author did a parity check i got 267 errors. I did not check mark fix problems i want to post log first... log attatched syslog.zip
January 31, 201214 yr Author Post SMART repots for sdb and add. do you mean sdb and sdd?? im sure thats what you meant here are the logs. let me know if you think i did not do it correct. its been a while since if done it! smartsdd.zip smartsdb.zip
January 31, 201214 yr Author ok re did them very carefully. (= using smartctl -d ata -tshort /dev/sdx smartctl -a -d ata /dev/sdx >/boot/smart.txt smartsdb.zip smartsdd.zip
January 31, 201214 yr Both drives share these lines: 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1 This indicates a common external problem such as power or cabling or physical port problems. Could be a loose SATA card. Keep changing things to isolate the problem.
January 31, 201214 yr Author should i focus on one over the other? *changed data cable on sdb double checked power cable appears to be in their tight...here is new smart after data cable change for sdb smartsdb.zip
February 2, 201214 yr Author i went ahead and did the fix parity errors on my server. but im afraid this will keep happening since it has happened before in the past...was anyone able to check my latest smart log? thanks
Archived
This topic is now archived and is closed to further replies.