February 5, 201214 yr I'm running unraid 4.7 pro on my unraid server.. Transfers TO my unraid server are as expected (30-40MB/sec), but transfer FROM are very slow (6MB/sec). Since transfer to the unraid server are fine, I'm assuming the cables are fine, what else can I check? Just to add a little more info, transfer was going from my unraid server to my Win7 desktop. Both connected to the same netgear gigE switch. The files were three ~4500MB files. Futher specs in my sig.
February 5, 201214 yr not to sound like the help desk guy from overseas.... But the last time i had this, i had not rebooted my desktop or my server in months. after rebooting my desktop, server and router... everything was back up to "fast" transfer speeds again...
February 6, 201214 yr I'm running unraid 4.7 pro on my unraid server.. Transfers TO my unraid server are as expected (30-40MB/sec), but transfer FROM are very slow (6MB/sec). Since transfer to the unraid server are fine, I'm assuming the cables are fine, what else can I check? Just to add a little more info, transfer was going from my unraid server to my Win7 desktop. Both connected to the same netgear gigE switch. The files were three ~4500MB files. Futher specs in my sig. I would not make that assumption. There are 4 pairs of wires in a LAN cable, 2 pair are used bi-directionally at higher speeds, the other two pair each used in one direction at lower speeds. (100<B/s or lower) It could easily be a cable, or a write speed bottleneck in the win7 PC.
Archived
This topic is now archived and is closed to further replies.