Array will not austostart

[andyperi]

Hi all hoping someone can help. Have been trying to get array autostart to work and cant seem to figure it out. I have tried to disable and re-enable in disk settings but that has not solved anything. I even tried to update to beta v7 to see if that would help but hasnt done anything. Any help would be greatly appreciated. 

cloud-diagnostics-20240909-2337.zip

[JorgeB]

The DHCP server didn't assign a valid IP initially:

 

Sep  9 23:34:08 Cloud dhcpcd[1477]: br0: probing for an IPv4LL address
Sep  9 23:34:13 Cloud dhcpcd[1477]: br0: using IPv4LL address 169.254.175.192
Sep  9 23:34:13 Cloud dhcpcd[1477]: br0: adding route to 169.XXX.XXX.0/16
Sep  9 23:34:13 Cloud dhcpcd[1477]: br0: adding default route

 

It did later, but only after Unraid tried to validate the trial key:

 

Sep  9 23:34:37 Cloud emhttpd: error: get_limetech_time, 287: Invalid argument (22): -2 (6)
### [PREVIOUS LINE REPEATED 6 TIMES] ###
Sep  9 23:35:01 Cloud reload_services: nginx
Sep  9 23:35:01 Cloud rc.nginx: Reloading Nginx server daemon...
Sep  9 23:35:01 Cloud rc.nginx: Checking configuration for correct syntax and then trying to open files referenced in configuration...
Sep  9 23:35:01 Cloud rc.nginx: /usr/sbin/nginx -t -c /etc/nginx/nginx.conf
Sep  9 23:35:01 Cloud rc.nginx: Reloading Nginx server daemon configuration...
Sep  9 23:35:02 Cloud dhcpcd[1477]: br0: offered 192.168.1.93 from 192.168.1.1
Sep  9 23:35:02 Cloud dhcpcd[1477]: br0: probing address 192.168.1.93/24

 

Trial keys require internet connection for the array to start

[andyperi]

thanks  for that the unraid machine has access to the internet? weird that it wouldn't validate the license to autostart?

[andyperi]

do i need to change some config to fix or allow while its booting up?

 

[JorgeB]

24 minutes ago, andyperi said:

weird that it wouldn't validate the license to autostart?

Like mentioned it didn't have internet when it tried to validate the license, so autostart fails, setting a static IP it may help.

[andyperi]

Thanks, i did have static ip on router when i did first post, have just assigned static ip on the device itself to see if that would fix it but it hasn't made any difference. 

[JorgeB]

Post new diags with the static IP.

[andyperi]

Thanks @JeorgeB appreciate the help, i ended up just restarting given i wasnt very far into set up and that seems to have fixed whatever the issue was.