September 12, 20241 yr I am trying to upgrade a drive and when I start the rebuild it goes for a while and then stop between 1 and about 5% complete. I had a sata card in the system but read that could be a problems so swapped it out for HBA card (LSI sas9300-16i), performance has improved but it is still crashing before the rebuild completes. I have tried with 3 different hard drive and it is still crashing. Attached in the latest diagnostic file. Any help would be greatly appreciated as I am been fighting the for several weeks. Thank you JDH z400tower-diagnostics-20240912-1502.zip
September 12, 20241 yr Community Expert The syslog in the diagnostics is the RAM copy and only shows what happened since the reboot. It could be worth enabling the syslog server to get a log that survives a reboot so we can see what happened prior to the reboot. The mirror to flash option is the easiest to set up, but if you are worried about excessive wear on the flash drive you can put your server’s address into the Remote Server field.
September 12, 20241 yr Community Expert Looks like problems communicating with multiple disks. Controller or maybe power problems.
September 13, 20241 yr Community Expert Solution Sep 12 17:09:56 Z400Tower kernel: mpt3sas_cm1: SAS host is non-operational !!!! HBA problems, make sure it's well seated and sufficiently cooled, you can also try a different PCIe slot.
September 15, 20241 yr Author I thought it was seated well, but apparently I was wrong reseated it and just completed the rebuild, Thank you!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.