September 21, 20241 yr Hi everyone, Everything was running smoothly until a power outage knocked out my Unraid NAS. When I booted the NAS back up, it entered a loop with the message: "detected capacity change from 0 to 129944." To regain access to my data, I removed the USB device with Unraid installed, connected it to my Mac, and made a backup of it. I then reinstalled Unraid on the same USB device and successfully booted up with a fresh copy. I also recovered my Pro Key during this process. I used this guide https://docs.unraid.net/unraid-os/getting-started/quick-install-guide/ Before I proceed with creating a new config, my question is: can I upload the backup of my previous Unraid installation to this forum thread for some sort of diagnosis and repair or is that an insecure thing to do? I would really like to restore the previous configuration to avoid the hassle of manually setting everything up again. Is there a way to recover the previous config? Wasn't there some new way whereby the config was being backed up to the could? If so, how to recover that config? Thanks in advance for any help!
September 21, 20241 yr Community Expert I would first try to restore only the /config folder from the backup, if it doesn't fully boot after that, post a photo showing the error.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.