Gerald Edwards Posted September 22, 2024 Posted September 22, 2024 I changed the cable, and it has pass SMART Test. I have attached the SMART report, is it safe to re-enable? thank you for you all for your help. WDC_WUH721414ALE6L4_9RHJWWZC-20240922-1101.txt Quote
Frank1940 Posted September 22, 2024 Posted September 22, 2024 5 hours ago, Gerald Edwards said: I changed the cable, You need to add some context to this. Why did you change the cable and why did you run the SMART test, and which one--- long or short? Quote
Gerald Edwards Posted September 23, 2024 Author Posted September 23, 2024 Thank you for your reply. UNRAID disabled the disk, so i ran a long SMART Test to try and have some diagnostics to share here. after looking at the forum it seemed like changing the SATA cable might be a solution, but before re-enabling the disk I was hoping to make sure it was safe to try and rebuild with this drive. Quote
JorgeB Posted September 23, 2024 Posted September 23, 2024 Please post the diagnostics after array start. Quote
Gerald Edwards Posted September 23, 2024 Author Posted September 23, 2024 Diagnostics attached. Thank you for your help tower-diagnostics-20240923-1328.zip Quote
JorgeB Posted September 23, 2024 Posted September 23, 2024 I would recommend running an extended test first, since the disk is showing some issues, if that passes, and since the emulated disk is mounting, you can rebuild on top. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.