September 23, 20241 yr So I've been running a drobo connected to a Windows nuc for probably 15 years. I learned recently that Drobo, as a company, no longer exists so I need to retire this setup. My plan is to set up an unRaid server and transfer everything over from the drobo where I have just under 4TB of data. My question is, if I get a 4TB drive and add that to unRaid then copy everything over from the Drobo via my network, can I then add the old drives from the Drobo to unRaid and have it join them to the first drive with the data already on it? Thanks in advance.
September 23, 20241 yr Community Expert Solution Yes, but the old drives will need to be re-formatted.
September 23, 20241 yr Also remember that if you plan to eventually have parity protection the parity drive must be at least as large as the largest data drive so figure out which drive that will be and install it last after all the data has been transferred. This will also speed up the transfer.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.