February 15, 201214 yr Hi guys, Stopping my array so I can reboot and its been stuck at Sync Filesystem for about 10 minutes... any ideas what would hold it up or cause it to hang here? Could it be a plugin? In the past they have simply shut down when I try to stop the array but not this time... Any thoughts?
February 15, 201214 yr Author Feb 14 20:28:28 Juggernaut emhttp: shcmd (54): /usr/local/sbin/emhttp_event stopping_svcs Feb 14 20:28:28 Juggernaut emhttp_event: stopping_svcs Feb 14 20:28:28 Juggernaut emhttp: Stop AVAHI... Feb 14 20:28:28 Juggernaut emhttp: shcmd (55): /etc/rc.d/rc.avahidaemon stop |& logger Feb 14 20:28:28 Juggernaut logger: Stopping Avahi mDNS/DNS-SD Daemon: stopped Feb 14 20:28:28 Juggernaut avahi-daemon[17117]: Got SIGTERM, quitting. Feb 14 20:28:28 Juggernaut avahi-dnsconfd[17127]: read(): EOF Feb 14 20:28:28 Juggernaut avahi-daemon[17117]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.188. Feb 14 20:28:28 Juggernaut avahi-daemon[17117]: avahi-daemon 0.6.28 exiting. Feb 14 20:28:28 Juggernaut emhttp: shcmd (56): /etc/rc.d/rc.avahidnsconfd stop |& logger Feb 14 20:28:28 Juggernaut logger: Stopping Avahi mDNS/DNS-SD DNS Server Configuration Daemon: stopped Feb 14 20:28:28 Juggernaut emhttp: shcmd (57): rm /etc/avahi/services/afp.service &> /dev/null Feb 14 20:28:28 Juggernaut emhttp: shcmd (58): rm /etc/avahi/services/smb.service &> /dev/null Feb 14 20:28:28 Juggernaut emhttp: Stop AFP... Feb 14 20:28:28 Juggernaut emhttp: shcmd (59): /etc/rc.d/rc.atalk stop |& logger Feb 14 20:28:28 Juggernaut emhttp: shcmd (60): ps axc | grep -q rpc.mountd Feb 14 20:28:28 Juggernaut emhttp: _shcmd: shcmd (60): exit status: 1 Feb 14 20:28:28 Juggernaut emhttp: Stop SMB... Feb 14 20:28:28 Juggernaut emhttp: shcmd (61): /etc/rc.d/rc.samba stop |& logger Feb 14 20:28:28 Juggernaut emhttp: Spinning up all drives... Feb 14 20:28:28 Juggernaut emhttp: shcmd (62): /usr/sbin/hdparm -S0 /dev/sdb &> /dev/null Feb 14 20:28:28 Juggernaut kernel: mdcmd (78): spinup 0 Feb 14 20:28:28 Juggernaut kernel: mdcmd (79): spinup 1 Feb 14 20:28:28 Juggernaut kernel: mdcmd (80): spinup 2 Feb 14 20:28:28 Juggernaut kernel: mdcmd (81): spinup 3 Feb 14 20:28:28 Juggernaut kernel: mdcmd (82): spinup 4 Feb 14 20:28:38 Juggernaut emhttp: Sync filesystems... Feb 14 20:28:38 Juggernaut emhttp: shcmd (63): sync Feb 14 20:28:42 Juggernaut emhttp: shcmd (64): /usr/local/sbin/emhttp_event unmounting_disks Feb 14 20:28:42 Juggernaut emhttp_event: unmounting_disks here is my syslog
September 9, 201312 yr my system is stuck on filesync as well. did you ever figure out what happened or how to get it past this point?
September 10, 201312 yr Ether an add-on is running or a terminal working directory is open. agreed. i manually stop my plugins (CP/SB/Trans) before stopping the array. If i dont it gets stuck right there.
September 10, 201312 yr I had the same issue once on RC12a and it wasn't related to a plugin: http://lime-technology.com/forum/index.php?topic=28222.0
September 10, 201312 yr I just upgraded from version 4.7 to the final 5.0 version and experienced the same problem. This was never the case before. This time the console was just sitting there at the blinking cursor and waiting for return results, keyboard did not do anything. Didn't try a Putty session. Finally I waited for a few minutes but nothing happened, wanted to go hit the sack, so in desparation I just held down the power button and the server powered down, not advised to do and not an elegant method. Powered it back on and after reboot typed from the console "poweroff" server powered off. Turned it back on this morning and it went into a parity check and corrected one Sync Error, it is still checking parity for another 2 hours. The advise here about unmounting the data discs is excellent but if it is not possible to give keyboard commands from the console because it is waiting for the return code/data will it accept keyboard commands from a Putty session? Also how do I change the settings so that it keeps the logs for at least a week and puts it like it did before in a separate directory? I can look at the syslog from UnMenu or UnRaid's GUI but before I had a directory on the flash drive that was called logs which kept logs for about a week, but this is no longer the case. Thanks O2G
September 10, 201312 yr Suggestion please update to 5 i386 this should help. Well that is what I meant by final version 5.0. I am running the stable i386 release of version 5, so your suggestion would not help.
September 10, 201312 yr Just finished the parity check, copied a 10GB file to the array after that topping the array and powering down the server went without a hitch. Love these intermittent problems caused by solar flares
Archived
This topic is now archived and is closed to further replies.