Hi,

I have a problem with my network when I am installing a fresh windows 10.
Install and everything went fine, but in Windows I see, that the internet connection is bridged via my 10/10GbE ethernetcard.
My 1GbE Nic, which should handle the internet connection gets a random IPv4 address which does not macht the IPv4 range of my internet router.

Deactivating the 10 GbE adapter and giving a matching IPv4 address to the 1GbE network does not work. 1Gbe adapter still stays as unidentified network.
How can I force unraid to use the 1Gbe instead of the 10Gbe connection?

Bridge source is br0 with virtio-net:
 

    <interface type='bridge'>
      <mac address='52:54:00:5e:e2:76'/>
      <source bridge='br0'/>
      <model type='virtio-net'/>
      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
    </interface>

 

A strange observation I made is, that every Network in Windows 10 is shown aas a 10/10Gbe internet connection.
I put the 10/10Gbe PCIe Card out of my mainboard, booted Unraid and installed a Windows 10 VM, only with the 1Gbe Onboard Network in bridged mode as an available network source.
Even then the Redhat driver states the card as 10/10 Network Connection in Windows... I bet previously it was shown always right as a 1 Gbe connection.
I even booted form a fresh installed Unraid Bootstick with the same behaviour, which drove me nuts.
Am I missing something out? Or can anyone confirm this?