Hello,

 

i speak dutch so if some one wil help me in dutch i perfer that. but i am greatful for anny help.

 

i got messege that my boot config is currupted. en got sugested to poste my diagnostics. ( i hope i got attected the richt file)

wat is the best way to handel this ?

 

I have a seccond question i replasted my paraty disk whith a nieuw one.

The old disk had a smart error   udma CRC error count.

 

But the nieuw disk also has now alreddy 4  do i nead to replase the nieuw paraty disk ?

 

one of my cache drives also has manny (196) crc error counts ? wat is this ?  i dont now wat this means.

 

tanks in advance 

harmentower-diagnostics-20241029-1229.zip

CRC errors are data transmission errors between the hard disk and the SATA controller on the MB.  When the data  is prepared for transmission, an error detecting code is calculated (called CRC) and sent with the data.  When the data is received, the CRC is recalculated using the received data.  If it does not match the received CRC, a retransmission is requested.  This process is repeated until the CRC's match.  So the error does not cause a problem beyond the fact that slows the data transfer rate. 

 

It is usually caused by a bad SATA  data cable or loose connectors.  Sometimes, if the cables are bundled tightly together, crosstalk problems can occur.  Only on very rare instances, a bad HD or STAT controller could cause the problem.

Edited October 29, 20241 yr by Frank1940

Tanks Frank1940.

 

i wil chek my cable. now i that i am tinking more about my USB boot problem is it possible ( and good practise) to use 2 usb stiks for boot Unraid ?

That share cfg file is corrupt on the flash drive:

 

# Share exists on disk4
#!Generatmd såttyngs�
shaseCmmlent="�
shareInCdude=""
shareExcmude=""
óhareWSeCq#he5"yew"
shareCOW½"auto"
shyreAl|oca|or="highwater"
shareSplitNevel=""
slaòeFloor5"0"M
sèareDxpnvt="e" �shareFruiÔ="no&
qlareSectraty5"pujlis" �shareÒeadList=""
snareWréteLisp=""
shareVolsizelimi4=#"
sháseExport_FR="?"
shqreExpor4NF�Fsid="0"
shabeSecwrityNFS<"0dblic 
shireHmstL)stNÆS=""
shabeEyportAFP-&-"
s`areSecõrhtyAFP="publiS"
shareReedNistAFP=" 
shareWr)tELi{uCFP9�"
shareVoLs)zelimit@FP=�" �shareVïldbpathAFP=""

 

Delete it and Unraid will recreate it, but note that it will be recreated with the default settings.

Thanx,

 

I deleded the share.cfg

That dit not work (no nieuw file was made) 

 

I deleded the Downloads.cfg. That solved it i gess.

12 hours ago, Harmen ter Schure said:

I deleded the share.cfg

Sorry, if I wasn't very clear, I meant the cfg for that share, downloads.cfg, the same file the plugin was warning you about.