November 4, 20241 yr I had a drive pool with a parity and disks in slots 1 and 2. There was a failure in slot 2, so the contents on it became emulated. I added a new drive to the pool, but the new drive was smaller than the failed drive, so i added it to slot 3 instead of 2. As soon as the preclear on drive 3 finished, without any interaction from me, it seems the parity drive deleted/lost/stopped emulating the contents of slot 2. The interface still indicates there is a missing drive there with emulated contents. I do not know how to get my files back. Even though the slot 3 drive is empty, I cannot remove it from the pool as then the unraid interface thinks there are too many missing devices in the pool. Is there an obvious answer here I am missing? Are my files gone? Is there a way to view the files on an emulated drive without going through the pool to check?
November 4, 20241 yr Community Expert Solution Nov 5 00:11:41 Satan kernel: XFS (md2p1): Metadata corruption detected at xfs_dir3_leaf_check_int+0xaf/0x111 [xfs], xfs_dir3_leaf1 block 0x4000058 Nov 5 00:11:41 Satan kernel: XFS (md2p1): Unmount and run xfs_repair Check filesystem on the emulated disk2, run it without -n
November 5, 20241 yr Author 4TB of data now in the the lost+found, and probably more just gone, but not a total loss. Thank you for your help!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.