November 4, 20241 yr I bought a Coral TPU M.2 B+M in a Gigabyte GA-H110-D3A motherboard, but the TPU is not detected. Is it possible that the motherboard is not compatible with the Coral? Or this M.2 slot is not compatible? According to the manual the m.2: Quote M2J_SATA (M.2 Socket 3 Connector) The M.2 connector supports M.2 SATA SSDs. If this slot is not compatible, can I put it in a PCI to m.2 adapter card into a PCi slot? In the x16 slot I have a GPU, is x1 PCI enough?
November 4, 20241 yr To be on the safe side, you can install the drivers if you haven't already done so: https://unraid.net/community/apps?q=coral#r But I'm assuming it's your board with the M.2 Sata. The Coral TPU requires at least a PCIe Gen2 x1 interface.
November 5, 20241 yr Author 6 hours ago, foo_fighter said: Did you install the driver? Yes 6 hours ago, enect said: To be on the safe side, you can install the drivers if you haven't already done so: https://unraid.net/community/apps?q=coral#r But I'm assuming it's your board with the M.2 Sata. The Coral TPU requires at least a PCIe Gen2 x1 interface. I did install ich's drivers. The I think the m.2 is sata only... This is the difference between sata and nvme SSD's then, now I've learnt my lesson hehe My board has a ton of PCIe Gen2 X1 Interface, I will buy an adapter card and try with that.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.