November 14, 20241 yr Hello, after a recent reboot I am seeing the following error repeatedly in the event log. NIC is X540-AT2 ixgbe 0000:03:00.1: Warning firmware error detected FWSM: 0x00070000 Any suggestions on resolution? I have a Supermicro X10DRi-T4+ motherboard and previously have not observed this issue. However, it now seems to occur every 2 seconds. Edited November 14, 20241 yr by cadamwil
November 14, 20241 yr Author It has been suggested in other places to update the firmware, but I can't seem to find anything older than X550 and the X550 update software shows the following. root@Beast:/mnt/bigblue/BlueDrive/X550Nic/X550/Linux_x64# sudo ./nvmupdate64e Intel(R) Ethernet NVM Update Tool NVMUpdate version 1.40.5.5 Copyright(C) 2013 - 2023 Intel Corporation. WARNING: To avoid damage to your device, do not stop the update or reboot or power off the system during this update. Inventory in progress. Please wait [|.........] Num Description Ver.(hex) DevId S:B Status === ================================== ============ ===== ====== ============== 01) Intel(R) Ethernet Controller N/A(N/A) 1528 00:002 Update not X540-AT2 available 02) Intel(R) Ethernet Controller N/A(N/A) 1528 00:003 Update not X540-AT2 available Tool execution completed with the following status: Device not found. Press any key to exit.
November 14, 20241 yr Author This doesn't mean anything to me, but all 4 nics have the same firmware and only an unused NIC is showing the error. root@Beast:/mnt# ethtool -i eth2 driver: ixgbe version: 6.1.106-Unraid firmware-version: 0x800003e1 expansion-rom-version: bus-info: 0000:03:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes root@Beast:/mnt# ethtool -i eth3 driver: ixgbe version: 6.1.106-Unraid firmware-version: 0x800003e1 expansion-rom-version: bus-info: 0000:03:00.1 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.