Hello there!

I finally got around buying new Hardware after the old one broke.

 

The USB Stick is still working and running on the new System, I hope that the HDD´s will work too.

I had no Parity and one Cache drive.

Currently it is running in my old Case, until I the new one arrives.

The PSU only has three SATA Power Connectors, although I had six drives.

I do know the HDD ordering.

 

Now I want:

Upgrade from 6.9 to the latest v6

Use a new USB Stick

Get one of my drives and the Cache to work

Upgrade the Cache from 128GB To 500GB

Upgrade the existing Docker/Plugins

Install and Config my newly needed Dockers

Configuring the BIOS

 

My questions are:

Can I just create a new USB Stick with the Tool and copy the /config folder over?

Can I just add my Cache and biggest HDD to the System, without looking at the order or should I ensure that I keep the old order?

I had a Script which which my encrypted Array got the Encryption key from ftp, is this still possible?

How can I see if my System goes into deep sleep with my SATA Controller?

How should I move the data from Cache 1 to Cache 2 ?

How should my order of actions be?

 

 

 

10 hours ago, Torlew said:

Can I just create a new USB Stick with the Tool and copy the /config folder over?

Yes, will need to transfer the key then.

 

10 hours ago, Torlew said:

Can I just add my Cache and biggest HDD to the System, without looking at the order or should I ensure that I keep the old order?

Order doesn't matter, unless you had some shares including/excluding speifc disks.

I assume first upgrading the Version and then adding my other stuff should be done first?

 

btw: Is the root password I use when I am directly connected to the Server the same as in the Webui? I can login into the Webui, but not onto the Server itself...

When creating the flash drive use the latest version, then copy your config.

 

14 hours ago, Torlew said:

btw: Is the root password I use when I am directly connected to the Server the same as in the Webui?

Yes.