December 3, 20241 yr Hi All! I have just purchased a TERRAMASTER D6-320 and connected it via a USB 3.2 card (https://www.amazon.co.uk/dp/B087G7T234) which is UASP enabled, I am using Unraid via a HP desktop PC, everything looks to be good including transfer speeds however the hard drives are not showing their SMART values in Unraid (including temperatures), I have an internal hard drive and an NVME inside the HP desktop PC and they both show SMART values and temperatures. I have also connected a USB drive into the USB 3.2 card and Unraid shows up the SMART values however, I plugged the TERRAMASTER D6-320 into my Windows PC and ran Crystal Disk Info and the SMART values show up on there so I am unsure why Unraid is not showing these values. I have also tried the Scrutiny and Disk Speed apps on Unraid however the TERRAMASTER D6-320 disks do not show up on there. Is anyone aware of a fix for this? Please let me know if further detail is required.
December 4, 20241 yr Community Expert Not all USB bridges are supported by Linux, or it may take longer for the kernel to support them than Windows, for example, also note that USB is not recommended for array and pool devices for reliability issues as well.
February 11, 20251 yr Terramaster released a new firmware to fix it. (5) Firmware Update Guide for Resolving SATA Block Device Serial Number Conflicts and Device UID Duplication in D6-320/D4-32 - TerraMaster Official Forum
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.