December 6, 20241 yr Nothing leaped out as an error, no popups or anyhting but looking at the log while rebuilding onto a larger disk I notice a LOT of below, do I need to stop it and replace something? I dont know how to read below to ID the disk ec 6 14:50:00 Server kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Dec 6 14:50:00 Server kernel: ata4.00: irq_stat 0x40000001 Dec 6 14:50:00 Server kernel: ata4.00: failed command: READ DMA Dec 6 14:50:00 Server kernel: ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 29 dma 4096 in Dec 6 14:50:00 Server kernel: res 53/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) Dec 6 14:50:00 Server kernel: ata4.00: status: { DRDY SENSE ERR } Dec 6 14:50:00 Server kernel: ata4.00: error: { ABRT } Dec 6 14:50:00 Server kernel: ata4.00: configured for UDMA/133 (device error ignored) Dec 6 14:50:00 Server kernel: ata4: EH complete Dec 6 14:50:00 Server kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Dec 6 14:50:00 Server kernel: ata4.00: irq_stat 0x40000001 Dec 6 14:50:00 Server kernel: ata4.00: failed command: READ DMA Dec 6 14:50:00 Server kernel: ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in Dec 6 14:50:00 Server kernel: res 53/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) Dec 6 14:50:00 Server kernel: ata4.00: status: { DRDY SENSE ERR } Dec 6 14:50:00 Server kernel: ata4.00: error: { ABRT } Dec 6 14:50:00 Server kernel: ata4.00: configured for UDMA/133 (device error ignored) Dec 6 14:50:00 Server kernel: ata4: EH complete Dec 6 14:50:00 Server kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Dec 6 14:50:00 Server kernel: ata4.00: irq_stat 0x40000001 Dec 6 14:50:00 Server kernel: ata4.00: failed command: READ DMA Dec 6 14:50:00 Server kernel: ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 2 dma 4096 in Dec 6 14:50:00 Server kernel: res 53/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) Dec 6 14:50:00 Server kernel: ata4.00: status: { DRDY SENSE ERR } Dec 6 14:50:00 Server kernel: ata4.00: error: { ABRT } Dec 6 14:50:00 Server kernel: ata4.00: configured for UDMA/133 (device error ignored) Dec 6 14:50:00 Server kernel: ata4: EH complete Dec 6 14:50:00 Server kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Dec 6 14:50:00 Server kernel: ata4.00: irq_stat 0x40000001 Dec 6 14:50:00 Server kernel: ata4.00: failed command: READ DMA Dec 6 14:50:00 Server kernel: ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 4 dma 4096 in Dec 6 14:50:00 Server kernel: res 53/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) Dec 6 14:50:00 Server kernel: ata4.00: status: { DRDY SENSE ERR } Dec 6 14:50:00 Server kernel: ata4.00: error: { ABRT } Dec 6 14:50:00 Server kernel: ata4.00: configured for UDMA/133 (device error ignored) Dec 6 14:50:00 Server kernel: ata4: EH complete Dec 6 14:50:00 Server kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Dec 6 14:50:00 Server kernel: ata4.00: irq_stat 0x40000001 Dec 6 14:50:00 Server kernel: ata4.00: failed command: READ DMA Dec 6 14:50:00 Server kernel: ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 20 dma 4096 in Dec 6 14:50:00 Server kernel: res 53/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) Dec 6 14:50:00 Server kernel: ata4.00: status: { DRDY SENSE ERR } Dec 6 14:50:00 Server kernel: ata4.00: error: { ABRT } Dec 6 14:50:00 Server kernel: ata4.00: configured for UDMA/133 (device error ignored) Dec 6 14:50:00 Server kernel: ata4: EH complete server-diagnostics-20241206-1452.zip
December 6, 20241 yr Community Expert It's this disk: Device Model: ST12000NM001G Serial Number: ZL284JSM It's not giving a valid SMART report, so it may be bad, but try replacing cables first.
December 6, 20241 yr Author Solution 55 minutes ago, JorgeB said: It's this disk: Device Model: ST12000NM001G Serial Number: ZL284JSM It's not giving a valid SMART report, so it may be bad, but try replacing cables first. Brilliant, thank you for the help - how did you find that?
December 6, 20241 yr Author I find that this drive is not in my array - should my array be safe once the rebuild finishes? .. and safe to let it finish building? The suspect drive hs spun down now so the errors stopped..
December 6, 20241 yr Community Expert 32 minutes ago, fysmd said: how did you find that? lscsci.txt in the diags. 28 minutes ago, fysmd said: . and safe to let it finish building? Should be
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.