UnRAID Version 6.12.10

Radarr Docker Version: 5.15.1.9463

 

System Specs:

• Case: Lian Li PC-A77FB
• Motherboard: Asus X99-A II ATX LGA2011-3 Motherboard
• Processor: Intel® Core™ i7-6850K
• RAM: G.Skill Ripjaws V Series 32GB (4 x 8GB) DDR4-3200 Memory
• Drive Cage(s): 3x Supermicro CSE-M35T-1B Hot Swap Bay
• SATA Extender: Supermicro AOC-SASLP-MV8 SATA Extender
• Cache Drive: Intel® SSD 660p 512GB M.2
• Boot Device: Flash JD_FireFly - 8 GB (sda)
• Parity    WDC_WD80EFAX-68KNBN0_VDHBX7VD - 8 TB (sdb)    
• Disk 1    ST8000DM004-2U9188_ZR1520JK - 8 TB (sdf)
• Disk 2    WDC_WD30EZRX-19D8PB0_WD-WMC4N0J7D8TT - 3 TB (sdd)
• Disk 3    WDC_WD20EARS-00MVWB0_WD-WCAZA9034298 - 2 TB (sde)
• Disk 4    WDC_WD80EFAX-68KNBN0_VDH2MGVD - 8 TB (sdh)
• Disk 5    ST4000DM005-2DP166_WGY0E53A - 4 TB (sdk)
• Disk 6    ST3000DM001-1CH166_W1F23145 - 3 TB (sdm)
• Disk 7    WDC_WD30EZRX-00SPEB0_WD-WCC4E0NP7NLR - 3 TB (sdl)
• Disk 8    ST8000DM004-2CX188_ZR128XVM - 8 TB (sdk)
• Disk 9    ST8000DM004-2U9188_ZR15M67L - 8 TB (sdg)
• Disk 10    ST4000DM004-2CV104_ZFN0BNMN - 4 TB (sdi)
• Disk 11    ST4000DM004-2CV104_ZFN1TJV6 - 4 TB (sdc)

 

Good afternoon,

 

I noticed this morning that downloads from Radarr were not being imported into Emby. After some digging, I noticed the following error in Radarr's log:

 

[v5.14.0.9383] code = Corrupt (11), message = System.Data.SQLite.SQLiteException (0x800007EF): database disk image is malformed
database disk image is malformed
   at System.Data.SQLite.SQLite3.Reset(SQLiteStatement stmt)
   at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt)
   at System.Data.SQLite.SQLiteDataReader.NextResult()
   at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave)
   at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior)
   at Dapper.SqlMapper.ExecuteReaderWithFlagsFallback(IDbCommand cmd, Boolean wasClosed, CommandBehavior behavior) in /_/Dapper/SqlMapper.cs:line 1142
   at Dapper.SqlMapper.QueryMultipleImpl(IDbConnection cnn, CommandDefinition& command) in /_/Dapper/SqlMapper.cs:line 1125
   at NzbDrone.Core.Datastore.BasicRepository`1.Insert(IDbConnection connection, IDbTransaction transaction, TModel model) in ./Radarr.Core/Datastore/BasicRepository.cs:line 188
   at NzbDrone.Core.Datastore.BasicRepository`1.Insert(TModel model) in ./Radarr.Core/Datastore/BasicRepository.cs:line 151
   at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push[TCommand](TCommand command, CommandPriority priority, CommandTrigger trigger) in ./Radarr.Core/Messaging/Commands/CommandQueueManager.cs:line 138
   at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push(String commandName, Nullable`1 lastExecutionTime, Nullable`1 lastStartTime, CommandPriority priority, CommandTrigger trigger) in ./Radarr.Core/Messaging/Commands/CommandQueueManager.cs:line 142
   at NzbDrone.Core.Jobs.Scheduler.ExecuteCommands() in ./Radarr.Core/Jobs/Scheduler.cs:line 42
   at System.Threading.ExecutionContext.RunFromThreadPoolDispatchLoop(Thread threadPoolThread, ExecutionContext executionContext, ContextCallback callback, Object state)
--- End of stack trace from previous location ---
   at System.Threading.Tasks.Task.ExecuteWithThreadLocal(Task& currentTaskSlot, Thread threadPoolThread)

 

The above error (or some version) is repeated dozens of times in the Radarr log.

 

After some searching the forums, this seems to be related to database corruption, but I'm not sure how to proceed to repair it.

 

Would anyone be able to point me in the right direction?

 

Thanks.

tower-diagnostics-20241210-1309.zip

Edited December 10, 20241 yr by Netbug
Solved

Resolved with these instructions: https://wiki.servarr.com/radarr/faq#i-am-getting-an-error-database-disk-image-is-malformed