Hi again!

 

I spent a couple of weeks without any space left. I left some files on the cache drive and today I finally installed a new disk. I pressed the "Move" button and I've seen a few of these error messages:

 

Mar 22 22:31:40 VALKYRIE logger: rsync: writefd_unbuffered failed to write 4 bytes [sender]: Broken pipe (32)

Mar 22 22:31:40 VALKYRIE logger: rsync: write failed on "/mnt/user0/filename.ext": No space left on device (28)

Mar 22 22:31:40 VALKYRIE logger: rsync error: error in file IO (code 11) at receiver.c(298) [receiver=3.0.2]

Mar 22 22:31:40 VALKYRIE logger: rsync: connection unexpectedly closed (31 bytes received so far) [sender]

Mar 22 22:31:40 VALKYRIE logger: rsync error: error in rsync protocol data stream (code 12) at io.c(635) [sender=3.0.2]

 

I have around 1.9TB left. Files are around 1GB. And not all files failed to be moved. Any ideas as to what may be causing this?

 

regards,

del

It apparently is still trying to write to one of your disks with insufficient space left.

 

You need to properly set the min-free space to use the mover in the way you are using it. 

 

What free-space allocation method are you using?  What do you have the mn-free set to on the shares you are copying to?

 

Joe L.

It apparently is still trying to write to one of your disks with insufficient space left.

 

You need to properly set the min-free space to use the mover in the way you are using it. 

 

What free-space allocation method are you using?  What do you have the mn-free set to on the shares you are copying to?

 

Joe L.

 

I'm using High-Water. Min free space was set at 0. I just set it to "20000000" (2GB, more than each file requires) based on the unofficial guide. Hit "Move" next and It still failed.

restart after changing the min free space.