March 28, 201214 yr Hello My Unraid server (4.7) doesn't boot anymore!!!It was working fine until yesterday, but tonight nothing My USB drive has a green led into it, and when it boots, the green light is usually blinking But now nothing, the green light stays solid...... What should I check 1st? Thanks
March 28, 201214 yr Hello My Unraid server (4.7) doesn't boot anymore!!!It was working fine until yesterday, but tonight nothing My USB drive has a green led into it, and when it boots, the green light is usually blinking But now nothing, the green light stays solid...... What should I check 1st? Thanks Check to see if it is still selected as the boot device in the BIOS.
March 29, 201214 yr Some versions of BIOS do change boot devices for odd reasons. Its a good thing to check, no use in troubleshooting everything else to hell and back to find out the PC was never even trying to boot from it,
March 29, 201214 yr Hello My Unraid server (4.7) doesn't boot anymore!!!It was working fine until yesterday, but tonight nothing My USB drive has a green led into it, and when it boots, the green light is usually blinking But now nothing, the green light stays solid...... What should I check 1st? Thanks Put the USB stick in a computer that you can select the boot device right at the POST. Could be anything.
March 29, 201214 yr Hello My Unraid server (4.7) doesn't boot anymore!!!It was working fine until yesterday, but tonight nothing My USB drive has a green led into it, and when it boots, the green light is usually blinking But now nothing, the green light stays solid...... What should I check 1st? Thanks If you can hook up a monitor and see what happens... Sounds like your system is not booting at all which might be due to the bios trying to boot from a different drive OR from a broken usb stick. If the boot device is correct then you can try and repair the usb drive on a windows pc. I would be carefull with that drive then though.. USB devices do have a limited lifespan.
March 29, 201214 yr Author Well, I think I found the issue I hooked up a monitor, and in the BIOS, the option Halt on errors was set to All I changed it to All, but Keyboard...............and now it's OK Thank you guys
Archived
This topic is now archived and is closed to further replies.