January 4, 20251 yr For now appr. 1 year I use unraid basic for my home NAS. It's equiped with a single 2TB SATA M.2 disk. Now I wanted to extend my system with a second disk, used for parity. I am running the actual Unraid version 6.12.14. Since my Dell Wyse5070 doesn't support a second SATA disc, I had to use an NVME disk now. Both disks are formated as xfs. Packing both devices into one array works as expected, it now offers 4 TB of storage. But as said, I wanted to add the second disk for parity. Since the SATA disk is slightly larger, I need to use the SATA for parity. But it is not possible to configure this, the NVME disk, that i use for storage is shown as Wrong. Also the second entry in the storage can't be set to unassigned, only 'no device' is available. Do you have proposals how I can fix this? wyse5070nas-diagnostics-20241229-1226.zip
January 4, 20251 yr Community Expert Solution You will have to set a New Config. https://docs.unraid.net/unraid-os/manual/storage-management/#reset-the-array-configuration Note that SSDs in the array cannot be trimmed.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.